The Ways Help you Determine Gearbox Problems

When you encounter the automotive gearbox problems, you are supposed to determine the causes firstly. Here are some basic information that will help you with troubleshooting automotive gearboxes.

Fluid leakage

The leaking may happen if the seal is broken or poorly installed. As transmission system is exposed to extremely high temperatures, automotive OEM shift parts can go through wear and tear quickly and as a result breakdown and leak. Therefore often checking your transmission and to find if any leakage occurs.

Gear slipping

The gear slipping issue occured if the reaction in the car acceleration is delayed after pressing on the gas, or while driving the car at a steady speed on higher gear, the car suddenly changes to a lower gear automatically. The slipping issue is caused by incorrect levels of transmission fluid or broken bands, as well as the internal clutch may be at fault, you are supposed to check the levels of fluid regularly.

Abnormal sudden movements

If your transition into a changed gear was not smooth and the engine takes a long time to adjust then you know the automotive gearbox is surging and the only way it can be mended is by replacing or repairing the vacuum lines.

Overheating

If the temperature monitor shows unusually high temperatures but the radiator is fine, then the car is overheating. This may be due to fluid getting clogged up in the cooler lines. The other possibility could be the oil pump troubleshooting which may cause the transmission to overheat. Any damages to the fluid pump must be rectified immediately when overheating occurs.

Part contents are from the internet source.