Many parts in the car are processed by the shell processing technology, especially the car differential is the main part of the car drive car, any car cannot lack the differential, but the car differential has very high and strict requirements in processing.
Automotive gearbox differential housings have very strict requirements on the beat during the process of production. Not only the surface quality of parts must be qualified, but also the dimensional accuracy of parts is very high. Therefore, the entire production process system must be stable. The process is difficult.
The coaxiality of the two holes should be ensured at both ends of the differential case, so the same tool should be used to process from one side in the process of processing. In order to prevent the vibration of the tool from affecting the processing efficiency and product quality, the vibration reduction tool rod can be used to solve the vibration problem of the tool.