News
Home Page > News > Industry news > Text
PRODUCTS CATEGORY

Have you mastered the correct use of the shifting finger of the car gearbox?

Source: http://www.yonglingcn.com   Time: 2025-01-23 Hits:0

  The correct use of the shifting finger of the gearbox is a basic skill that every driver must master. A standard shifting finger action can not only improve the shifting accuracy and comfort of the car, but also effectively reduce the incidence of shifting failure and ensure driving safety. How to make the correct shifting finger movement?

  First, hold the shift lever correctly

  Before performing the shift finger action, you first need to learn to properly hold the shift lever. Under normal circumstances, the left hand holds the steering wheel, the right hand holds the shift lever, and the right arm rests on the hand position to maintain the stability of the body. Hold the finger of the shift lever, preferably the finger and the middle finger, which can reduce the power transmission of the finger part, thereby improving the accuracy of the operation.

  Second, step on the clutch

  You need to depress the clutch before you can shift. This is because the clutch can effectively separate the engine and transmission power system to ensure a smooth shift process. So, before shifting, be sure to put your foot on the floor first, and then gently step down the clutch with the tip of your foot.

Have you mastered the correct use of the shifting finger of the car gearbox?

  Three, press the shift lever

  When the clutch is fully pressed, you can press the shift lever action. In the press operation, you need to gently press the rod head with your fingertips, while observing the change of the dial to determine the appropriate gear. When pressing the shift lever, keep the finger smooth, do not overexert, so as not to cause unnecessary damage to the gearbox.

  Fourth, release the clutch

  When the shift lever is pressed, the clutch needs to be released to connect the powertrain to the gearbox. It should be noted here that when releasing the clutch, pay attention to the strength of the foot, do not be too relaxed or too rapid, so as to avoid unnecessary impact on the vehicle when accelerating or decelerating.

  Step on the gas quickly

  When the clutch is released, the accelerator needs to be pressed quickly to push the vehicle forward. When stepping on the accelerator, it is necessary to adjust the strength and speed of the foot reasonably according to the acceleration and deceleration of the vehicle, as well as the changes in the road ahead, so that the vehicle is stable and smooth.

  The correct use of the shifting finger of the automobile gearbox is a process that needs long-term accumulation and practice. Only through repeated operation and practice, can we effectively master this skill. Therefore, as a driver, we should pay attention to the usual practice, practice frequently, and do the finger movement of shifting to make perfect, so as to improve driving skills and safety.

©2014 Copyright Navite Ltd.
Links: gearbox shift block, flicker moving LED candle