Why Does the Handle Not Smooth Shift Into the Gear?

To experience the driving pleasure is one of the main reasons for many people to buy a car with the manual transmission, while the moment that the shift lever is smooth pushed into the gear creates the great fun. On the contrary, if the gear bits are jerky and hard to shift into, not only without fun, but can bring lots of troubles. Why will this condition take place?

1. The transmission shaft rusts, the clutch can not normal move and with the poor bit back, so that the gear can not into the shift block following the normal track.

2. Because of the clutch failure, the clutch separation stroke is not enough, further causing the clutch separation is not complete and the gear can not into the gearbox shift block. Encounter such a situation, it is recommended to adjust the separation trip.

3. The clutch self-locking force is so large that cause the difficulty of in and out the shifting gear, in this case, it needs to adjust the clutch line and gear lock in a repair shop.

4. The clutch driving strap are deformed for some reasons, resulting in poor separation. In this case, it should be replaced with a good quality of clutch pressure plate which matches the original car.