Why Can You Not Smooth Shift Handle Into the Gear?

In addition to some clutch problems mentioned in the last article, the shifting failures may occur in the gearbox.

1. The gearbox oil used for the lubrication of gearbox differential housing, gearbox shift blocks, or gearbox shift forks needs to be replaced, just as the engine oil, gearbox oil is also known as the transmission gear oil. To a certain extent, the transmission gear oil is required to be replaced regularly, if not replaced timely, the result is a decrease in the lubrication effect, which will make the resistance for gear shifting greatly increased, so that the gear is very jerky.

2. The gear of new car usually will be more jerky, this is because the new car has not been running, the gearbox parts and components have not yet reached the best run-in state, so compared to the car driving for some time, new car is usually more difficult to shift into the gear.

3. The car in calm state usually makes the gear very jerky, after all, in the case of low temperatures, the adhesion of transmission gear oil can not achieve the best condition, the lubrication effect is naturally not very good, so resulting in a frustrated sense of shifting gear.

Of course, each car driver has the different habits of shifting, therefore the gears will have different gear tracks, if the lubrication condition of gear oil in the gearbox shift blocks is good, and the clutch stroke is moderate, then naturally the gear shifting will be very easy and smooth. If the personal habit is not standardized, it will damage the clutch and gear, reduce their use lives, or increase their wear and tear, which will make the gear becomes more and more jerky, so every driver should develop and have good driving habits.