News
Home Page > News > Company news > Text
PRODUCTS CATEGORY

How to Check out the Clutch Problems?

Source: http://www.yonglingcn.com   Time: 2017-07-20 Hits:0

There may be a problem with the engine of your car. To check which automotive OEM parts the problem comes out, switch your car on and listen to the sound that comes from the engine. If the engine does not make an odd noise, then apply pressure to the clutch. Generally, the clutch in these states needs to be noted or not ignored.


Automotive OEM Parts


Noisy clutch

A noisy clutch can be caused by many factors that could potentially damage your car and the automotive OEM parts. The most important part to remember is not to ride the clutch. This means that your foot is constantly pushing the pedal in. This could lead to the possibility of a bad pilot bearing which would need to be replaced immediately. You can identify this problem if the clutch makes a high pitched sound.


Slipping clutch

Release the clutch slowly whilst in gear, if the car does not stall you should get it checked out, because your car might have the problem where the clutch plate soaked in engine oil.


Dragging clutch

If the pedal fails to release, it may be due to dragging clutch, which is likely caused by multiple issues such as air in the system, a small fraction of fluid or oil, or possibly a high level of lubrication and oil being present.

©2014 Copyright Navite Ltd.
Links: gearbox shift block, flicker moving LED candle