Gearbox Shift Fingers to the use of precautions

　　Transmission shift is one of the skills drivers must master in the process of driving. The correct shift mode and use precautions can ensure the safety of driving and smooth running. Here is a detailed introduction to the gearbox Shift Fingers to the use of precautions.

　　First, pay attention to the choice of gear

　　It is very important to choose the right gear during driving. If the wrong gear is selected, the gearbox will work abnormally and even cause an accident. Therefore, we must pay attention to the choice of gear when shifting.

　　1. Slow gear

　　The low speed gear is generally used when the horsepower needs to be increased in the process of driving uphill, starting, entering and leaving the parking space, etc. In general, it is not recommended to keep this gear for a long time to avoid transmission wear.

　　2. Medium speed gear

　　Medium speed gear is suitable for spacious road and speed is not too fast, shift several times less, suitable for urban driving.

　　3. High speed gear

　　High speed gear is suitable for driving on outside roads and other roads, which can save fuel and prevent the danger of excessive acceleration.

　　Two, the correct shift method

　　After choosing the right gear, it is also necessary to pay attention to the correct shift method, so as to avoid the failure of the gearbox, but also to enjoy a better driving experience.

　　1. Fully press the clutch first, then release the gas pedal.

　　2. Move the handle to the desired gear and release the clutch as soon as possible. Step 1 and Step 2 must be completed simultaneously.

　　3. Accelerate as fast as you need to.

　　4. Continue to repeat the above steps until you reach the desired speed.

　　In short, choosing the right gear and using the right shift method can give full play to the performance of the car, and protect the parts of the gearbox, so as to ensure the safety of driving. At the same time, it is also necessary to pay attention to environmental factors in the use process according to different driving environment and road conditions, so as to avoid accidents caused by improper operation.